Actuators & wiring centres.

Up to 8 zones can be controlled from the UH8. on board the UH8 are two heating time channels, each zone allows you to specify which time channel if should follow. 2 additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.

An 8 zone wireless wiring centre designed to work with the Slimline-RF and neoAir thermostats.

The UH8-RF provides central switching and is therefore ideally situated next to the underfloor heating manifold. 8 zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. The boiler signal can also be sent via RF to the RF switch, providing the installer a totally wireless solution.

SA91 electro thermal actuator is designed to control the open/close of hot water pipe in the heating system so as to control indoor temperature. Operates on a ‘usually closed’ basis.

Fed by a 230v fused-spur supply, our Saswell 8-Zone wiring centres are compatible with virtually any underfloor heating thermostat and actuator.